- Performance Evaluation on the Endmill of High Speed Machining for Selection of Tungsten Carbide (WC-Co) Material
-
Dong-Hee Kwon, Jeong-Suk Kim, Min-Wook Kim, Young-Keun Jeong, Myung-Chang Kang
-
J Korean Powder Metall Inst. 2008;15(5):359-364.
-
DOI: https://doi.org/10.4150/KPMI.2008.15.5.359
-
-
20
View
-
0
Download
-
1
Citations
-
 Abstract
 PDF
- To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.
-
Citations
Citations to this article as recorded by  - Tool Wear Characteristics of Tungsten Carbide Implanted with Plasma Source Nitrogen Ions in High-speed Machining
Sung-Ho Park, Duck Hyun Wang
Journal of the Korean Society of Manufacturing Process Engineers.2022; 21(5): 34. CrossRef
|
kpmi
